S
ince 1938 Zephyr has served aerospace and industry with high quality, technically
innovative tools produced in a manufacturing environment featuring intense quality
control and superior customer service. Today more than ever Zephyr is carrying on this
tradition of technical superiority coupled with outstanding quality and service. This
catalog is one more example of Zephyr quality and service. It is specially designed and
edited to make selection and ordering easy.
ZEPHYR PART NUMBERS--
your guide to quality and hardness
Only Zephyr of all major screwdriver bit manufacturers gives you a complete part
number on the bit to assure that you have the right bit you need for the job.
Use "X" grade for hard sheet metal screws and fasteners. "A" grade is recommended for
machine screws.
"I" Intermediate hardness is also available on order.
All Zephyr bits are heat treated in small lots for consistent quality. Zephyr's unique Z-ForgeTM
process assures exact dimensional fit in the recess. A Zephyr bit gives the truest fit,
longest performance and with our new ACR
®
bits, the least cam-out and product
damage of any available at any price.
Made in U.S.A.
Every Zephyr bit proudly wears this mark. We assure you that we will always supply the
finest product engineered to last.
Safety Counts
Zephyr products are designed to be safe under proper working conditions. Be sure that
you know the proper way to use a tool before working with it. We recommend the
wearing of eye protection when using any hand tool or machine shop tool.
Keep your tools clean, inspect them from time to time, and replace worn or damaged
tools. The nominal cost will be more than offset by the reduction in mistakes and the
savings on rework.
Made to order specials available on request.
FOR MORE ON ZEPHYR QUALITY AND INNOVATION
SEE CENTER INSERT.
ACR
®
-Phillips
and Phillips
page 2-3-4
Slotted
page 5
ACR
®
-Pozidriv
®
and Pozidriv
®
page 6
French Recess
page 7
Square Recess
page 8-9
Torx
®
page 9-10
Torx
®
Tamper
Resistant
page 9-10
Tri-Wing
®
-ACR
®
and Tri-Wing
®
page 14-15-16
Hi-Torque
®
page 16
*Clutch
*Frearson
ACR
®
, Torq-Set
®
, Torq-Set
®
-ACR
®
, Tri-Wing
®
, Tri-Wing
®
-ACR
®
, and Pozidriv
®
are registered trademarks of the Phillips
Screw Company. Torx
®
and TorxPlus
®
are registered trademarks of the Camcar Division of Textron. Supadriv
®
is a
registered trademark of European Industrial Services (Fasteners) Limited. ZEPHYR
®
is a registered trademark of
Zephyr Manufacturing Co., Inc.
*Items not in this catalog, available on request.
NOTE: Desoutter and Yankee type drives available on request.
Hex Socket
page 7-8
Hex Tamper
Resistant
page 8
Torx Plus
®
page 11
Torq-Set
®
-ACR
®
and Torq-Set
®
page 11-12-13
*Supadriv
®
This catalog contains screwdriving tools to fit these screw heads:
Spanner
page 11